Kapstone Medical Blog

Shared responsibility for cybersecurity of medical devices widely recognized

Three Key Differences Between MDD and MDR

Medical device companies hoping to bring their products to market in the European Union (EU) will now have to [..]

Read More

How to Develop Your Medical Device Go-to-Market Strategy

Many ideas for new or improved medical devices come from observing a problem. Maybe a wearable is too heavy. Maybe [..]

Read More

FDA Cleared vs. Approved vs. Registered: The Difference

FDA approved vs. cleared vs. registered and what it means for your medical device The Food & Drug Administration [..]

Read More

5 Facts About ISO 13485 Every Medical Device Manufacturer Needs to Know

ISO 13485 certification is a routine practice for medical device manufacturers. So much so, in fact, that [..]

Read More

US FDA Q-submissions: A Comprehensive Guide for Medical Device Manufacturers

The regulatory framework around bringing a medical device to market in the United States is complex. While the US [..]

Read More

How and When to Register Your Establishment with the FDA & Who Needs to Register

FDA registration is mandatory for all businesses involved in the commercialization of medical devices in the [..]

Read More

How to Determine FDA Primary Mode of Action

When a medical device operates in combination with a drug or biologic, it is known as a combination product. [..]

Read More

What is an ISO certification and what role does it play in the medical device industry?

In order to commercialize medical devices in accordance with international standards, medical device and [..]

Read More

Understanding 21 CFR 820.30 Design Controls for Medical Devices

Under 21 CFR 820, the US FDA lays out current good manufacturing practices (GMP) pertaining to bringing safe and [..]

Read More

Explore the Changes to Medical Device Classification Under EU MDR

The European Medical Device Regulation (MDR) replaced the Medical Device Directive (MDD) in May of 2017. However, [..]

Read More

10 Tips on How to Respond to an FDA 483

FDA inspections are part of doing business as a medical device company in the United States. Sometimes, the FDA [..]

Read More

4 Steps to Developing a Successful Medical Device Commercialization Strategy

An effective medical device commercialization strategy is imperative for successful product launch and scaling. [..]

Read More

Implementing design controls: Medical device quality, compliance, & traceability

Let’s talk design controls – essential, but sometimes overlooked by even established medical device companies. [..]

Read More

Design Control Traceability Matrix: 5 Essentials for Medical Device OEMs

Every aspect of the medical device life cycle — from concept to post-market activities — is subject to [..]

Read More

EU MDR and Post Market Surveillance: What You Need to Know

Part 6 in a 7-part series on the EU’s Medical Device Regulation The new EU Medical Device Regulation (MDR) builds [..]

Read More

Using eSTAR and PreSTAR Templates

With the date for use of eSTAR for all 510(k) submissions fast approaching on October 1 2023, I decided it was [..]

Read More

What is European MDR and Why It happened, Timelines for Compliance

First in a 7-part series on the EU’s Medical Device Regulation The European Parliament passed the Medical Device [..]

Read More

What is an FDA 483, and How Do You Respond?

Food & Drug Administration (FDA) inspections are part of doing business as a medical device company in the United [..]

Read More

5 Factors That Guide Successful Medical Device Consulting Partnerships

Whether the innovation of an established industry manufacturer or that of a newly formed startup, taking a medical [..]

Read More

5 Ways a Medical Device Consultant Helps OEMs Overcome Regulatory Challenges

The breakthrough technologies and innovations behind medical devices rapidly advance the quality of patient care. [..]

Read More
  • 08/28/2024

How Much Does it Cost to Develop a Medical Device?

How Much Does it Really Cost to Develop a Medical Device? A Conversation with Kapstone Medical's Experts Hayden [..]

Read More

Annex XVI: What to do if Your Non-Medical Product is Subject to Regulation Under MDR

New Device Regulations Under MDR Annex XVI Starting on May 26, 2021, medical device companies hoping to [..]

Read More

FDA Biocompatability: The Guide to the ISO 10993 Standards

What is ISO 10993 and what is it used for? ISO 10993 is a set of international standards for the biological [..]

Read More

How medical device consultants guide successful 510(k) submissions

If a medical device manufacturer intends to bring a product to market in the United States, it must notify the [..]

Read More

5 Signs Your Quality Management System Needs an Upgrade

Most medical device companies already have a QMS in place. It’s hard to track, document, and validate any of your [..]

Read More

How to Define and Classify Your Medical Device

FDA Medical Device Classification and Definitions Regulatory affairs can often be the most challenging part of [..]

Read More

How GDPR Applies to Medical Devices

With the European Union’s General Data Protection Regulations (GDPR) going into effect May 2018, much of the [..]

Read More

Using 3D Printed Parts To Make Low-cost Live-cell Imaging Microscope

3D printing doesn’t always have to be used for new, high-tech applications such as printing tailor-made medical [..]

Read More

4 Effective Strategies for Medical Device Development Cost Optimization

The complexities of medical device development don’t begin and end with the device. The process surrounding [..]

Read More

An Integrated vs. Piecemeal Approach to Product Development

In this article, I’d like to focus on another important aspect of maximizing the value of your idea—the need to [..]

Read More

How Outsourced Regulatory Affairs Consultation Can Save Your Medical Device Company Time and Money

A Conversation with John Kapitan | Founder & CEO, Kapstone Medical Bringing a medical device to market is a [..]

Read More

Kapstone Medical New Product Development (NPD) Roadmap

Kapstone Medical is a single-source solution for medical device companies We take a fully integrated approach to [..]

Read More

The Pro’s and Con’s of Medical Device Materials

Medical Device Material Selection: Pros and Cons Medical Device Companies Need to Know Material selection is one [..]

Read More
  • 08/02/2024

Streamlining FDA Review: Strategic Solutions and Expert Insights

Streamlining FDA Review: Strategic Solutions and Expert Insights In 2023, the FDA faced a significant surge in [..]

Read More
  • 10/07/2024

Navigating Regulatory Challenges: A Conversation with Kapstone's VP of Regulatory

Navigating Regulatory Challenges: A Conversation with Kapstone's VP of Regulatory In the fast-changing world of [..]

Read More

510(k) Premarket Notifications: How to Determine Substantial Equivalence

A Conversation with Kellen Hills | Regulatory Affairs Specialist, Kapstone Medical Since 1906, the US Food and [..]

Read More

European MDR: EUDAMED Database and UDI

Part 7 in a 7-part series on the EU’s Medical Device Regulation The European Database for Medical Devices [..]

Read More

The Top 5 Features Medical Device Companies Request for Their Quality Management Systems

What features should you request for your ISO 13485 QMS? A Conversation With Jon Speer & David DeRam, Greenlight [..]

Read More

Product Design & Development

In this video, we’ll discuss: Justin Rowland explains the range that Kapstone Medical is involved in the product [..]

Read More

5 Simple Steps to Intellectual Property Development

Most of us would love to continuously “be innovative” and create lots of intellectual property to create [..]

Read More

Key to Creating Value from a Medical Device Idea

The Key to Creating Value from a Medical Device Idea? It’s YOU. Most physician inventor entrepreneurs tend to be [..]

Read More

Why Kapstone?

President & Founder, John Kapitan explains provisions made by Kapstone Medical to create efficiency and speed to [..]

Read More

ACA tax has $665 million impact on medical device industry

A new study has found the excise tax on medical devices enacted as part of the Affordable Care Act had a $665 [..]

Read More

A Roadmap to Success for Surgeon Inventors – Part 1: From Concept to Commercialization

Introduction Thomas Edison is quoted as saying, “Anything that won't sell, I don't want to invent. Its sale is [..]

Read More

European MDR: How do we get ready for MDR?

Second in a 7-part series on the EU’s Medical Device Regulation The new Medical Devices Regulation (2017/745/EU), [..]

Read More

4 Questions to Ask Before Submitting a 510(k)

So you’re an inventor who wants to develop a medical device and use the invention in practice. You know the FDA [..]

Read More

European MDR: Product Portfolios and Technical Documentation

Part 4 in our 7-part series on meeting the new requirements under the EU MDR Complying with the European Union’s [..]

Read More

How a medical device consultant helps manufacturers manage quality and risk

A number of decisions about bringing a medical device to market are dictated by regulatory requirements. Chief [..]

Read More

Regulatory Strategy

Carolyn Guthrie explains the process of FDA requirements and classifications of a device. Kapstone Medical is a [..]

Read More

EU MDR: How Clinical Evidence Requirements Affect Medical Device Approvals

Part 5 in a 7-part series on the EU’s Medical Device Regulation Among the significant changes facing device makers [..]

Read More

Continuing Challenges Facing IP Valuation for Medical Device Innovations

An industry analysis by Grant Moss of Adapt IP Ventures and reported in IAM online magazine, suggests that IP [..]

Read More

BioLIFE4D Has Successfully 3D Printed Human Cardiac Tissue

BIOLIFE4D announced earlier this year that it has successfully 3D printed human cardiac tissue demonstrating the [..]

Read More

How Kapstone Helps Medical Device Companies Upgrade Their QMS

No two companies can use exactly the same quality management system (QMS). These systems have to be designed with [..]

Read More

5 Ways Medical Device Development Companies Can Save Money When Developing Products

A Conversation With John Kapitan | Founder & CEO, Kapstone Medical Medical device development companies large and [..]

Read More

European MDR: Notified Bodies

Part 3 in our 7-part series on meeting the new requirements under the EU MDR If you are new to obtaining marketing [..]

Read More

World’s First Use of 3D Printing May Revolutionize Reconstructive Surgery

A Welch surgical team has performed the first jaw reconstruction surgery using 3D printed titanium specifically [..]

Read More

Solving The Top 4 Challenges Medical Device Companies Face When Developing New Products

A Conversation With Justin Rowland | Project Manager Bringing a medical device to market is difficult for startup [..]

Read More

6 Imperatives For Improving Cybersecurity in Healthcare

The House Committee on Energy and Commerce is calling on HHS to act promptly on all recommendations for medical [..]

Read More

5 Questions Inventor’s Need To Ask Before Developing Their Inventions

Busy clinicians often find themselves identifying a clinical need that a new product or new technology would fill. [..]

Read More

Using Competitor Research Throughout the Medical Device Product Development Lifecycle

A Conversation With David Walsh | Director of Engineering According to David Walsh, Director of Engineering at [..]

Read More

Shape-shifting the Future of Medical Implants

Using 3D printing and sequential folding technology, researchers are proposing to revolutionize the way medical [..]

Read More

A Roadmap to Success for Surgeon Inventors - Part 1: From Concept to Commercialization

Busy physicians often find themselves identifying a clinical need that could be satisfied with a new product or [..]

Read More

Quality Assurance

Carolyn Guthrie discusses QMS: Quality Management System, and product related systems of a medical device. [..]

Read More

3D printed Robot Fits Inside MRI For More Accurate Breast Biopsy

Stormram 4 sounds like the latest video game from Xbox, instead it is a unique robot made from 3D printed plastic [..]

Read More

Playbook sets framework for dealing with medical device cybersecurity attacks

Citing the increasing number of cyber attacks in healthcare and concern about the potential for targeting medical [..]

Read More

FDA Approves First Continuous Glucose Monitoring System Not Requiring Blood Sample Calibration

The FDA approved last July the first continuous glucose monitoring system that could free millions of people with [..]

Read More

FDA Approves OSSDsign’s 3D Printed Cranial Implant

The FDA has approved OSSDsign’s new cranial implant that uses an innovative and patented composite material [..]

Read More

The Next Generation of 3D Printing

Brief roundup of medical grade 3D printing materials

Read More

Developing Microspheres for 3D Printing Living Tissue

The dream of using 3D printing technology to regenerate damaged or diseased tissues faces a number of [..]

Read More

Shared responsibility for cybersecurity of medical devices widely recognized

The FDA issued a warning about vulnerabilities of medical devices to cybersecurity threats in a press release on [..]

Read More

A Roadmap to Success for Surgeon Inventors - Part 2: Is Your Next Product Idea Viable? The Case for Feasibility Studies

How does a surgeon inventor determine quickly and efficiently whether or not his idea has clinical and technical [..]

Read More

A Roadmap to Success for Surgeon Inventors - Part 5: The Top Ten Things to Avoid

In previous installments of this eBook series, we touched on pointers for optimizing your chances of success as a [..]

Read More

Ebook - Roadmap to Success for Surgeon Inventors - Part 4

This series of articles focuses on a different paradigm for bringing new ideas to market, one in which you as a [..]

Read More

Manufacturing Solutions

In this video, we’ll discuss: President & Founder, John Kapitan explains provisions made by Kapstone Medical to [..]

Read More

Reprocessing medical devices market to grow to $3 billion by 2024

The reprocessed medical devices market will rise from nearly $983 million in 2015 to $3.35 billion by 2024 for a [..]

Read More

What You Need to Know about FDA’s Draft Guidance on Writing Test Reports

The FDA issued updated draft guidance for submission of test reports and non-clinical bench test performance in [..]

Read More

What You Missed Last Month (October 2015 – Medical Devices & 3D Printing)

Happy November! Fall is finally here, and with the cascading leaves also descends a plethora of exciting [..]

Read More

Opportunities and Challenges in 3D Printing

SmartTech Publishing released a new study of additive manufacturing in orthopedics in May 2017. The market [..]

Read More

A Roadmap to Success for Surgeon Inventors - Part 3: Surgeon as Entrepreneur

Where do you start? How many different angles are involved? Here again there is no set formula, but the following [..]

Read More

The Steps to a 510k

Carolyn Guthrie goes over the process of getting a 510k for your company. Kapstone Medical is a single-source [..]

Read More

Intellectual Property Insights from John Kapitan

President & Founder, John Kapitan, speaks on the topic of Intellectual Property (IP), patents, and guiding a [..]

Read More

How Intellectual Property Brings Value to an Inventor

Surgeon inventors need to invest in intellectual property. The following dialogue outlines how a typical inventor [..]

Read More

Heart Implant, 3D Printed to Order

For patients with heart rhythm disorders, current pacemakers and implantable cardioverter defibrillators are [..]

Read More

What You Missed Last Month May Edition

Lots went on in the Medical Device, Manufacturing, and 3D Printing fields in the month of May. Luckily, we are [..]

Read More

FDA's ASCA Pilot Program

Agency publishes details for conformity assessment The US Food and Drug Administration’s Center for Devices and [..]

Read More

What You Missed Last Month August Edition (3D Printing and Healthcare)

August was another busy month for the Medical Device Industry and 3D printing is continuing its evolution in the [..]

Read More

How Useful Are Pre-sub Meetings With the FDA?

Making the most of your Q-submissions How important is the FDA Pre-sub meeting? If saving time and money is [..]

Read More

Systematic Review of 3D Printing in Spinal Surgery: The Current State of Play

3D printing, also known as “additive manufacturing”, is a growing industry, specifically in the spinal surgery [..]

Read More

Four of the Top 3D Printing Stories in Orthopedics in 2014

The 3D printing industry is taking the orthopedics world by storm. Here at Kapstone, we’ve been watching the [..]

Read More

What You Missed Last Month November Edition (3D Printing)

November proved to be a busy month in the MedTech Industry. From a custom 3D printed shoulder implant helping a [..]

Read More

Market Researchers See Double-digit Growth in 3D Medical Device Market

The global market for 3D printed medical devices is poised for rapid growth according to a new market research [..]

Read More

What You Missed Last Month - April News on 3D Printing Advancements

Along with springtime showers, April brought a lot of interesting news in Medical Device Manufacturing and 3D [..]

Read More

FDA Reconfirms Continued Acceptance of Single Audits

In an update to its review of the International Medical Device Regulators Forum report the FDA in December [..]

Read More

Go Further with Your Idea with Project Manager, Justin Rowland

President & Founder, John Kapitan explains provisions made by Kapstone Medical to create efficiency and speed to [..]

Read More

Staying Focused: Using A Framework For Your Competitive Research

(Second in a series of posts on doing competitive research)

Read More

Emerging AI Applications in Medical Devices

In April, the U.S. FDA issued its first marketing permit for a medical device using artificial intelligence to [..]

Read More

What You Missed Last Month (Apr 2015 Edition)

It’s time to catch up, and Kapstone Medical is ready to equip and guide you through the month of April 2015 with [..]

Read More

What You Missed Last Month (April Edition)

The month of April was another busy one, especially in the Medical Device industry! April was jam packed with news [..]

Read More

FDA’s Advice for Medical Device Interoperability

The FDA issued its final guidance for medical device interoperability on Sept. 6, 2017. The guidance offers [..]

Read More

What You Missed Last Month (September 2015 Edition –Medical Device & 3D Printing)

As summer drew to a close and the leaves began to turn to vivid shades of orange, red, and yellow, Team Kapstone [..]

Read More

What You Missed Last Month (May Edition)

As usual, time is continuing to fly by and as time soars right by us so can the news! May has come and gone in the [..]

Read More

Three Considerations for 3D Printing of Medical Devices in 2015

In late October, Medical Innovations Labs of Austin, TX announced their new 3D printing hub. They plan to provide [..]

Read More

Competitive Analysis: Determining Your Competitive Position

(Third in a series of posts on competitive research)

Read More

8 Trends For 3D Printing in Spine

According a systematic literature review in the Journal of Spine Surgery, the fast-growing 3D printing industry [..]

Read More

Key In-sight news: 3D Printing Corneas

With little fanfare in the media, researchers announced that they had successfully used 3D printing to produce the [..]

Read More

Roadmap to Success...Does Your Design Need a Second Opinion?

When and how to get constructive feedback throughout the development process

Read More

What You Missed Last Month January Edition (3D Printing & Cybersecurity)

Lots has happened in the MedTech Industry in the beginning of the New Year! The FDA has made statements concerning [..]

Read More

What You Missed Last Month – December Edition

From 3D printed light receptors for prosthetic vision devices to $10 3D ultrasound chips and 3D printing for [..]

Read More

$10 chip changes standard ultrasound into 3D

In a novel adaptation of the chip in your smartphone that tracks how your phone is oriented can turn a $50,000 2D [..]

Read More

What You Missed Last Month - June News - 3D Print Advancements

With the beginning of summer, there have also been many updates in the MedTech Industry in the month of June. [..]

Read More

FDA lists proposed guidance publications for 2019

The FDA issued its list of proposed guidance publications for 2019 on Oct. 5 as part of its agreement to speed [..]

Read More

NSF International offers online learning for MDSAP program

The National Sanitation Foundation (NSF) has produced a series of online training courses for regulatory [..]

Read More

FDA Exempts More Than 1000 Medical Devices from 510(k)

FDA exempts more than 1000 devices from 510(k) premarket submissions.

Read More

What You Missed Last Month (June 2015 Edition- Medical Device & 3D Printing)

Each month, as our team digs through the array of medical device, 3D printing, and orthopedics stories on the web, [..]

Read More

3D-printed device could treat spinal cord injuries

The dream is to eventually 3D print a spinal cord scaffold layered with viable neurons that can be implanted into [..]

Read More

FDA’s Strategic Policy Roadmap for 2018

FDA Commissioner aims to streamline review and beef up technical support

Read More

FDA Sets Priorities for 2016: What Does It Mean for Medical Devices?

It’s the year of Big Data, and FDA has slated several priorities for fiscal year 2016 to improve regulatory [..]

Read More

What You Missed Last Month (May 2015 Edition- Medical Device & 3D Printing)

Additive manufacturing, or 3D Printing, is dominating spring medical device industry headlines, and at halfway [..]

Read More

Researchers 3D-print light receptor array on a curved surface

Achievement advances quest for bionic eye prototype The act of “seeing” is the result of a complex system of [..]

Read More

What You Missed Last Month – November Edition

Lots went on in the 3D Printing field last month. From 3D printed light receptors for prosthetic vision devices to [..]

Read More

What You Missed Last Month December Edition (3D Printing)

3D printing is continuing to make major steps in the healthcare and MedTech Industry. From creating high business [..]

Read More

Medical 3D Printing is Pushing Metrology Labs to Keep Pace

It is probably safe to say that the advancements in additive manufacturing of medical devices have come at a pace [..]

Read More

A Roadmap to Success for Surgeon Inventors, Part 4: The Cost of Developing Your Idea

This series of articles focuses on a different paradigm for bringing new ideas to market, one in which you as a [..]

Read More

Competitive Research: Do It In-house or Outside? The Answer May Surprise You!

(First in a series on developing competitive research skills)

Read More

Fast 3D Printing of Living Cells While Maintaining Viability

A major challenge to 3D printing living tissues is that many 3D printing techniques are based on using heat or [..]

Read More

What You Missed Last Month (Jan 2015 Edition)

While you were busy drawing up your latest medical device invention during the month of January, here are a few [..]

Read More

What You Missed Last Month - October (3D Printing)

The MedTech Industry has been very busy with 3D printing! From the first 3D printed human corneas and custom [..]

Read More

What You Missed Last Month (January 2017 Edition)

Stay up to date with the latest medical device manufacturing news. Here’s a recap while you were getting a start [..]

Read More

A Roadmap to Success for Surgeon Inventors, Part 3: Technologies for Development of Your Ideas

Traditionally, as a surgeon inventor, you may have waited for one of the large implant companies to recognize the [..]

Read More

Making the Case for Industrial Design and Human Factors

An all too familiar dilemma: a physician has a great idea, but can only take it so far. A new device, a change to [..]

Read More

A Roadmap to Success for Surgeon Inventors, Part 5 (installment 1 of 2)

The Top Ten Things to Avoid

Read More

What You Missed Last Month (August 2015 Edition –Medical Device & 3D Printing)

It’s back to school with Team Kapstone! In August, we picked up educational and inspirational stories in 3D [..]

Read More

What You Missed Last Month September Edition (3D Printing and New Patents)

September was another demanding month for 3D printing and the Medical Device Industry. In case you missed it, here [..]

Read More

What You Missed Last Month July Edition (3D Printing)

The Medical Device Industry is continuing to evolve, especially in the area of 3D printed technology. The global [..]

Read More

What You Missed Last Month – August 2018

August was another busy month for the MedTech Industry. From the discussion on medical device taxes to the [..]

Read More

FDA Recommendations For Medical Device Cybersecurity

The topic of cybersecurity for medical devices became a hotter issue this past year amid several high-profile [..]

Read More

What You Missed Last Month September

September was a busy month for the 3D printing industry. There has been new insight on additive manufacturing and [..]

Read More

Leveraging 3D Printing For Small Hospitals and Device Developers

The Society of Manufacturing Engineers’ (SME) 2018 Annual Report took a deep dive look at medical additive [..]

Read More

What You Missed Last Month – January Edition

Artificial Intelligence and 3D Printing are making history in the medical device world. From AI manufacturing [..]

Read More

What You Missed Last Month (Mar 2015 Edition)

Welcome to the latest round of Kapstone Medical’s “What You Missed Last Month” in the Medical Device industry. [..]

Read More

MedTech in the US Healthcare Industry

Will 2017 be a good year for MedTech in the US Healthcare Industry? Signs point to yes. Looking at the uncertain [..]

Read More

What You Missed Last Month October Edition (3D Printing)

Another busy month has passed in the MedTech Industry; especially with 3D printing. From using custom 3D printed [..]

Read More

What You Missed Last Month (July 2015 Edition –Medical Device & 3D Printing)

While you were enjoying your summer vacation, Team Kapstone compiled some of the best stories in 3D printing, [..]

Read More

What You Missed Last Month February Edition (3D Printing)

February was a lovely month and has passed quickly as we celebrated Valentine’s Day and continued to work hard on [..]

Read More

What You Missed Last Month (February 2017 Edition)

February was a busy month for the MedTech world. From the FDA approval of a 3D printed cranial implant to the [..]

Read More

FDA Seeks Feedback on Draft Guidelines For 3D Printing Medical Devices

FDA committed to fostering innovation in additive manufacturing.

Read More

What You Missed Last Month (June Edition)

A lot happened in June; from the progression of joint cooperation between India and Japan for the development of [..]

Read More

FDA Announces Updates to “Refuse to Accept Policy”

7 questions to ask before submitting 501(k) The FDA recently issued updates to its guidance for its “Refuse to [..]

Read More

What You Missed With the New Year Tax Reform

Did Republicans forget the medical device tax? When all the dust had settled following the passing of the Tax Cut [..]

Read More

A Roadmap to Success for Surgeon Inventors, Part 5 (installment 2)

The Top Ten Things to Avoid

Read More

Manufacturing at Home: Advancements in 3D Printing

No matter where you turn, you are bound to run into a news headline expounding on the wonders of 3D printing. From [..]

Read More

A Roadmap to Success for Surgeon Inventors, Part 2: Is Your Next Product Idea Viable?

Is Your Next Product Idea Viable?

Read More

KAPSTONE MEDICAL CELEBRATES 10TH ANNIVERSARY

Kapstone adds staff and expands services to continue guiding, equipping and inspiring the MedTech community

Read More

What You Missed Last Month July Edition

Lots has happened in the MedTech Industry since last month. New EU Medical Device Regulations continue to pose as [..]

Read More

What You Missed Last Month (March Edition)

The month of March has come and gone in what seems like the blink of an eye! U.S. Senate bills on FDA inspections [..]

Read More

What You Missed Last Month (Feb 2015 Edition)

It’s that time again—from the current catalysts behind the hand and wrist market to material innovation in [..]

Read More

Creating Exponential Value, Part II: What is Your Idea Worth?

While it may be enticing to look for possible suitors soon after inception of your idea, chances are that the full [..]

Read More

Creating Exponential Value, Part I: How Far Should You Take Your Idea?

Our series of articles for the physician inventor continues with a three-part look into the business side of [..]

Read More